No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Features Are Licensed on CE Series Switches?

What Features Are Licensed on CE Series Switches?

The following tables list licensed features of CE series switches. Licensed features can be configured and used only after the license is activated.

  • After loading the license for the Telemetry function, you must restart the switch only in V200R003C00 and then can configure the function. After loading the licenses for other functions, you can configure the functions without restarting the switch.

  • For the CE8868EI, after one of the following licenses is loaded, you need to run the active card-license command to activate the license on the card in a specified slot to make the license take effect. The CE8868EI has four card slots. You can purchase the following licenses based on the number of card slots that need to be used.
    • 25GE rate upgrade license: CE-LIC-25G01
    • 40GE port license: CE-LIC-40G01
    • 100GE port license: CE-LIC-100G01
  • For the CE6880EI and CE12800E that has ED-E, EG-E, or EGA-E series cards installed, the 1588v2 function is under license control in V200R005C10 and later versions. If the switch is upgraded from V200R005C00 to V200R005C10 or a later version, the existing 1588v2 configuration on the switch is not affected, but a new 1588v2 configuration cannot be added and the existing 1588v2 configuration cannot be modified. You are advised to apply for and load a 1588v2 license after the upgrade.
Table 22-44 License control items supported by CE12800 series switches

License Control Item

External Model

Minimum Version Required

Before License Activation

After License Activation

CE12800 MPLS function: DE0S00MPLS01

CE128-LIC-MPLS

V100R001C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 TRILL function: DE0S0TRILL01

CE128-LIC-TRILL

V100R001C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 VS function: DE0S0000VS01

CE128-LIC-VS

V100R002C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 IPv6 function: CE128-LIC-IPv6

CE128-LIC-IPv6

V100R002C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 EVN function: CE128-LIC-EVN

CE128-LIC-EVN

V100R003C00

This function does not take effect and cannot be configured.

No license is required when EVN BGP is applied for the ARP broadcast suppression function on a VXLAN.

This function takes effect and can be configured.

All FCF ports of the CE12800: CE-LIC-FCF-ALL

CE128-LIC-FCFAL

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

48 FCF ports of the CE12800: CE-LIC-FCF-PORT

CE128-LIC-FCF48

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 Telemetry function: CE-LIC-TLM

CE128-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 MACsec function: CE-LIC-MACSEC

CE128-LIC-MACSEC

V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800 function authorization package 1: CE128-LIC-BUN01

CE128-LIC-BUN01

V100R003C00

The MPLS, TRILL, VS, IPv6, and EVN functions do not take effect and cannot be configured.

The MPLS, TRILL, VS, IPv6, and EVN functions take effect and can be configured.

CE12800 function authorization package 3: CE128-LIC-BUN03

CE128-LIC-BUN03

V100R005C00

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions do not take effect and cannot be configured.

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions take effect and can be configured.

Table 22-45 Functional license control items supported by CE12800E series switches

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

CE12800E VS function: DE0S0000VS01

CE128E-LIC-VS

CE12800E equipped with ED-E, EG-E, or EGA-E series cards: V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E IPv6 function: CE128-LIC-IPv6

CE128E-LIC-IPV6

V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E NSH function: CE-LIC-NSH

CE128E-LIC-NSH

CE12800E equipped with ED-E, EG-E, or EGA-E series cards: V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E Telemetry function: CE-LIC-TLM

CE128E-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E intelligent lossless network functions: CE-LIC-LLETH

CE128E-LIC-AIF

CE12800E equipped with FD-X series cards: V200R005C00

Intelligent lossless network functions excluding fast ECN and dynamic load balancing do not take effect and cannot be configured.

The intelligent lossless network functions take effect and can be configured.

CE12800E 1588v2 (PTP) function: CE-LIC-PTP

CE128E-LIC-PTP

CE12800E equipped with FD-X series cards: V200R005C00

CE12800E equipped with ED-E, EG-E, and EGA-E series cards: V200R005C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E discarded packet capture function: CE-LIC-TLM

CE128E-LIC-TLM

CE12800E equipped with FD-X series cards: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE12800E IOAM function: CE-LIC-TLM

CE128E-LIC-TLM

CE12800E equipped with FD-X series cards: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Table 22-46 License control items supported by CE8800 series switches

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

CE8800 VXLAN function: CE-LIC-VXLAN

CE88-LIC-VXLAN

V100R006C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

All FCF ports of the CE8800: CE-LIC-FCF-ALL

CE88-LIC-FCFAL

V100R006C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

16 FCF ports of the CE8800: CE-LIC-FCF-PORT

CE88-LIC-FCF16

V100R006C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 FCoE NPV function: CE-LIC-NPV

CE88-LIC-NPV

V100R006C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 Telemetry function: CE-LIC-TLM

CE88-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 intelligent lossless network functions: CE-LIC-LLETH

CE88-LIC-AIF

CE8850-64CQ-EI, CE8861EI, and CE8868EI: V200R005C00

Intelligent lossless network functions excluding fast ECN and dynamic load balancing do not take effect and cannot be configured.

The intelligent lossless network functions take effect and can be configured.

CE8800 1588v2 (PTP) function: CE-LIC-PTP

CE88-LIC-PTP

CE8850-64CQ-EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 discarded packet capture function: CE-LIC-TLM

CE88-LIC-TLM

CE8850-64CQ-EI, CE8861EI, and CE8868EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 IOAM function: CE-LIC-TLM

CE88-LIC-TLM

CE8850-64CQ-EI, CE8861EI, and CE8868EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE8800 25GE rate upgrade: CE-LIC-25G01

CE88-LIC-25G

CE8868EI: V200R005C10

An SFP28 port on the CE88-D24S2CQ works at the rate of 10 Gbit/s.

An SFP28 port on the CE88-D24S2CQ works at the rate of 25 Gbit/s.

CE8800 40GE port: CE-LIC-40G01

CE88-LIC-40G

CE8868EI: V200R005C10

A CE88-D16Q card cannot be registered, and ports on the card cannot be used.

A CE88-D16Q card can be registered, and ports on the card can be used.

CE8800 100GE port: CE-LIC-100G01

CE88-LIC-100G

CE8868EI: V200R005C10

A CE88-D8CQ card cannot be registered, and ports on the card cannot be used.

A CE88-D8CQ card can be registered, and ports on the card can be used.

CE8800 finance-level high reliability: CE-LIC-FINHA

CE88-LIC-FINHA

V200R005C10

The enhanced DAD function does not take effect and cannot be configured.

The enhanced DAD function takes effect and can be configured.

CE8800 function authorization package 1: CE88-LIC-BUN01

CE88-LIC-BUN01

V100R006C00

The VXLAN, FCF, and FCoE NPV functions do not take effect and cannot be configured.

The VXLAN, FCF, and FCoE NPV functions take effect and can be configured.

Table 22-47 License control items supported by CE7800 series switches

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

CE7800 VXLAN function: CE-LIC-VXLAN

CE-LIC-VXLAN

V100R003C10SPC100

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

All FCF ports of the CE7800: CE-LIC-FCF-ALL

CE78-LIC-FCFAL

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

16 FCF ports of the CE7800: CE-LIC-FCF-PORT

CE78-LIC-FCF16

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE7800 FCoE NPV function: CE-LIC-NPV

CE78-LIC-NPV

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE7800 Telemetry function: CE-LIC-TLM

CE78-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE7800 finance-level high reliability: CE-LIC-FINHA

CE78-LIC-FINHA

V200R005C10

The enhanced DAD function does not take effect and cannot be configured.

The enhanced DAD function takes effect and can be configured.

CE7800 function authorization package 1: CE78-LIC-BUN01

CE78-LIC-BUN01

V100R005C00

The VXLAN, FCF, and FCoE NPV functions do not take effect and cannot be configured.

The VXLAN, FCF, and FCoE NPV functions take effect and can be configured.

Table 22-48 License control items supported by CE6800 series switches

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

CE6800 VXLAN function: CE-LIC-VXLAN

CE68-LIC-VXLAN

CE6855HI, CE6856HI, CE6850HI, CE6850U-HI, CE6851HI, CE6857EI, CE6860EI, CE6865EI, CE6870EI, CE6875EI, and CE6880EI: V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

All FCF ports of the CE6800: CE-LIC-FCF-ALL

CE68-LIC-FCFAL

CE6800 series switches excluding the CE6810LI and CE6880EI: V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

16 FCF ports of the CE6800: CE-LIC-FCF-PORT

CE68-LIC-FCF16

CE6800 series switches excluding the CE6810LI and CE6880EI: V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 FCoE NPV function: CE-LIC-NPV

CE6800-LIC-NPV

CE6800 series switches excluding the CE6810LI, CE6870EI, CE6875EI, and CE6880EI: V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 NSH function: CE-LIC-NSH

CE68-LIC-NSH

CE6880EI: V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 Telemetry function: CE-LIC-TLM

CE68-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 MACsec function: CE-LIC-MACSEC

CE68-LIC-MACSEC

CE6875EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 intelligent lossless network functions: CE-LIC-LLETH

CE68-LIC-AIF

CE6865EI: V200R005C00

Intelligent lossless network functions excluding fast ECN and dynamic load balancing do not take effect and cannot be configured.

The intelligent lossless network functions take effect and can be configured.

CE6800 1588v2 (PTP) function: CE-LIC-PTP

CE68-LIC-PTP

CE6865EI: V200R005C00

CE6880EI: V200R005C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 discarded packet capture function: CE-LIC-TLM

CE68-LIC-TLM

CE6857EI and CE6865EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 IOAM function: CE-LIC-TLM

CE68-LIC-TLM

CE6865EI: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE6800 finance-level high reliability: CE-LIC-FINHA

CE68-LIC-FINHA

CE6800 series switches excluding the CE6880EI: V200R005C10

The enhanced DAD function does not take effect and cannot be configured.

The enhanced DAD function takes effect and can be configured.

CE6800 function authorization package 1: CE68-LIC-BUN01

CE68-LIC-BUN01

CE6800 series switches excluding the CE6810LI: V100R005C00

The VXLAN, FCF, and FCoE NPV functions do not take effect and cannot be configured.

The VXLAN, FCF, and FCoE NPV functions take effect and can be configured.

Table 22-49 Functional license control items supported by CE5800 series switches

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

CE5800 VXLAN function: CE-LIC-VXLAN

CE58-LIC-VXLAN

CE5880EI: V200R005C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE5800 NSH function: CE-LIC-NSH

CE58-LIC-NSH

CE5880EI: V200R005C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

CE5800 Telemetry function: CE-LIC-TLM

CE58-LIC-TLM

CE5880EI: V200R005C10

CE5855EI: V200R019C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 610776

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next