No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Causes

Common Causes

This fault is commonly caused by one of the following:
  • The priority mapping configured in the DiffServ domain of the inbound interface is incorrect.
  • There are configurations affecting the queues that packets enter on the inbound interface.
  • There are configurations affecting the queues that packets enter in the VLAN that packets belong to.
  • There are configurations affecting the queues that packets enter in the system.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 611795

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next