No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Do Command Configurations Fail to Take Effect?

Why Do Command Configurations Fail to Take Effect?

The system allows configurations to take effect immediately or in two stages.
  • Run the system-view command to enter the system view and edit configurations in two-stage mode. After running a configuration command, you need to run the commit command to make the configuration take effect.

  • Run the system-view immediately command to enter the system view and edit configurations in immediate mode. After you run a configuration command and press Enter, the configuration immediately takes effect.

For V100R003C00 and later versions, if a user modified the configuration in the two-stage mode but did not commit the configuration, the system prompt changes from ~ to *, reminding the user that the configuration has not been committed. The system prompt will change back to ~ after the user runs the commit command. Configurations that are not committed will not be saved in the configuration file.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 612169

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next