No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Causes

Common Causes

This fault is commonly caused by one of the following:
  • The packets do not match rules of the traffic classifier in the traffic policy.
  • The traffic behavior associated with the traffic classifier in the traffic policy is configured incorrectly.
  • The traffic policy is applied incorrectly.
  • The traffic policy is also applied to another object with a higher priority. A traffic policy is applied to an interface, a VLAN, and the system in descending order of priority.
  • The traffic policy conflicts with another traffic policy and the packets match rules in the applied traffic policy.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608357

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next