No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View and Change the Engine ID?

How Can I View and Change the Engine ID?

To view the local SNMP engine ID, run the display snmp-agent local-engineid command.

To set the local SNMP engine ID, run the snmp-agent local-engineid engineid command. An SNMP engine ID on a network must be unique.

The value of engineid is a hexadecimal string of 10-64 characters. It consists of an enterprise ID and device information. If you want to manually set an SNMP engine ID, follow these rules:
  • The first four bytes are the vendor's private engine ID allocated by Internet Assigned Numbers Authority (IANA). The engine ID of Huawei devices is 2011 in decimal notation. The first binary digit has a fixed value 1. Therefore, the engine ID in hexadecimal format is 800007DB.
  • The device information is configured manually. You are advised to use the IP address or MAC address of the switch as device information to uniquely identify the switch.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604656

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next