No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Enable and Disable the Alarm Function on a Console Port?

How Do I Enable and Disable the Alarm Function on a Console Port?

By default, a terminal displays alarm or log information on a device when you log in to a device through a console port. You can run commands to determine whether a terminal displays the information.
  • Disable prompt information.

    <HUAWEI> undo terminal alarm        //Disable a terminal from displaying alarm information.
    <HUAWEI> undo terminal logging      //Disable a terminal from displaying log information.
    <HUAWEI> undo terminal debugging    //Disable a terminal from displaying debugging information.
    <HUAWEI> undo terminal monitor      //Disable a terminal from displaying prompt information.

    After the undo terminal monitor command is executed, all prompt information will not be displayed, including alarm, log, and debugging information.

  • Enable prompt information.

    <HUAWEI> terminal monitor           //Enable a terminal to display prompt information.
    <HUAWEI> terminal alarm             //Enable a terminal to display alarm information.
    <HUAWEI> terminal logging           //Enable a terminal to display log information.
    <HUAWEI> terminal debugging         //Enable a terminal to display debugging information.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 607010

Downloads: 2948

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next