No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure VSs?

How Do I Configure VSs?

The following example describes basic stack configurations. For details, see the related product configuration manual.

<HUAWEI> system-view
[~HUAWEI] admin
[~HUAWEI-admin] virtual-system vs1      //Create a VS named vs1.
[*HUAWEI-admin-vs:vs1] port-mode group      //Set the VS mode to group mode. Two VS modes are available: group mode and port mode.
[*HUAWEI-admin-vs:vs1] assign interface 10GE 1/0/0      //Assign a physical port to VS.
Warning: All configurations of the interfaces will be deleted. All interfaces of
 the same group will be assigned. Continue? [Y/N]: y
[*HUAWEI-admin-vs:vs1] quit
[*HUAWEI-admin] commit
[~HUAWEI-admin] display virtual-system
Name                             Status
Admin-VS                         running
vs1                              running
If the status of a VS is running, the VS is created.
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 613244

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next