No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can 40GE and 100GE Interfaces of the CE-L36LQ-FD Card Be Used Simultaneously?

Can 40GE and 100GE Interfaces of the CE-L36LQ-FD Card Be Used Simultaneously?

By default, the CE-L36LQ-FD card has 36 40GE interfaces. The 40GE optical interfaces numbered 4n and 4n+1 (n is an integer that ranges from 0 to 8) can be switched into 100GE interfaces using the port mode 100ge command. If a 40GE interface is switched into a 100GE interface, the interface can work at the rates of 40 Gbit/s and 100 Gbit/s, and other 40GE interfaces that are not switched can work properly.

# Switch 40GE1/0/1 into 100GE1/0/1.
<HUAWEI> system-view
[~HUAWEI] port mode 100ge interface 40ge 1/0/1
Warning: This operation will delete current port(s) and create new port(s), and all configurations of the current port(s) will be cleared. Continue? [Y/N]: y
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 613374

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next