No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Troubleshooting Guide
CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQs

FAQs

The configuration process provided in this document is basic configuration and is for reference only. For the detailed configuration process and precautions, see the product configuration guide.

Unless otherwise specified, this document uses configuration for V100R003 as an example and the configuration takes effect in two stages. Note the following in the two-stage mode:
  • After completing a configuration, you must run the commit command to commit the configuration. Otherwise, the configuration will not take effect.
  • In V100R003 and later versions, if you do not run the commit command after modifying a configuration, the system prompt ~ is changed to *, prompting you that the configuration is not committed. The system prompt * will be restored to ~ after you run the commit command to commit the configuration.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 663984

Downloads: 3050

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next