No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Function of inherit-config?

What Is the Function of inherit-config?

You can run the stack member member-id renumber new-member-id [ inherit-config ] command to change the stack member ID.
  • If you specify inherit-config, the switch inherits the original stack configuration after it restarts, including the stack priority, stack domain ID, and physical member port configuration. The common service port configuration will be lost. For example, the port split configuration will be lost, but the split configuration of physical member ports is inherited.

  • If you do not specify inherit-config, the current stack configuration and common service port configuration are lost after the switch restarts, and the configuration related to the new stack member ID in the configuration file takes effect.

  • If the configuration file contains offline configuration for the new stack member ID, do not specify inherit-config in the command.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604105

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next