No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Are Specifications of AC Power Cables for the CloudEngine Series Switches?

What Are Specifications of AC Power Cables for the CloudEngine Series Switches?

CloudEngine 12800 and 12800E

The AC power cables applicable to the CloudEngine 12800 and 12800E series switches depend on the type of power sockets used in your equipment room. Two types of AC power cables are available to suit different power sockets: power distribution unit (PDU) power cable and country-specific power cable.

  • PDU power cables are delivered with a PDU with C20 straight sockets. A PDU power cable has a C19 straight female connector at one end and a C20 straight male connector at the other end, as shown in Figure 22-22.
  • Country-specific power cables are delivered in compliance with standards of the destination country or region. For example, AC power cables used in China have PI angle male connectors, as shown in Figure 22-23.

If PDUs with C20 straight sockets are available in a cabinet, use PDU power cables complying with local standards.

If there is no PDU with C20 straight sockets in a cabinet, use power cables specific to the country or region where the switch is used.

Figure 22-22 PDU power cable and PDU

Figure 22-23 China-specific power cable and power strip

Connection

An AC power cable transmits AC power to a chassis and allows maximum current of 16 A. An AC power cable is connected in the following way:

  • The C19 straight female connector is connected to a socket on the power distribution unit at the rear of the CloudEngine 12800 chassis.
  • The country-specific connector or C20 straight male connector at the other end is connected to an external power outlet.

CloudEngine 8800, 7800, 6800, and 5800

AC power cables applicable to the CloudEngine 8800, 7800, 6800, and 5800 series switches include PDU power cables (C13 straight female to C14 straight male) and country-specific power cables (C13 straight female to PI straight male). The two types of AC power cables differ in the connector used to connect to the power outlet.

  • 150 W/350 W/600 W AC power modules: The AC power sockets or directly connected circuit breakers must have a current rating of 10 A.
  • 600 W/1200 W AC&240 V DC power modules: The AC power sockets or directly connected circuit breakers must have a current rating of 10 A.
  • 600 W/1200 W high-voltage DC power modules: The directly connected circuit breakers must have a current rating of 10 A.

When 110 V power input is provided to a 1200 W AC&240 V DC power module, the AC power socket or directly connected circuit breaker must have a current rating of 16 A.

If a CloudEngine 8800, 7800, 6800, and 5800 series switch uses two power modules for 1+1 power redundancy, the superior circuit breaker for the power distribution box or PDU to which the power modules are connected must have a current rating of 25 A.

The AC power cables delivered with a switch must comply with the standards used in the delivery destination.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616499

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next