No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The load-balance profile cl Command Is Configured to Enable Local Traffic Preferential Forwarding in a CE12800 Stack. Where cl in the Command Needs to Be Invoked?

The load-balance profile cl Command Is Configured to Enable Local Traffic Preferential Forwarding in a CE12800 Stack. Where cl in the Command Needs to Be Invoked?

By default, the local traffic preferential forwarding function is disabled on the CE12800. It can be enabled using a command. An example is as follows:

# Enable local traffic preferential forwarding in load balancing profile cl.

<HUAWEI> system-view
[~HUAWEI] load-balance profile cl
[*HUAWEI-load-balance-profile-cl] ecmp local-preference enable
[*HUAWEI-load-balance-profile-cl] commit
  • You can run the load-balance profile profile-name command to create a global load balancing profile and enter the load balancing profile view. Parameter profile-name specifies a profile name and does not need to be invoked.

    By default, there is a load balancing profile named default. The CE12800 supports only one load balancing profile.

  • You can run the display load-balance profile profile-name command to view detailed information about a specified load balancing profile. If you run the load-balance profile profile-name command to specify a profile name different from that of the existing load balancing profile, the profile is renamed and the configuration in the profile remains unchanged.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 614156

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next