No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Query Port Group Assignment Information on the Switches During VS Assignment?

How to Query Port Group Assignment Information on the Switches During VS Assignment?

The switches support two VS assignment modes:
  • Port mode: A port on an interface card can be allocated to any VS.

  • Port group mode: All ports on the same forwarding chip of an interface card must be assigned to the same VS.

During assignment of VSs in port group mode, learn about the mapping between ports and forwarding chips to facilitate port planning. You can run the display device port-map [ slot slot-id ] command on the switches to view the mapping between ports and forwarding chips.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 610809

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next