No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure Inter-Chassis Link Aggregation?

How Do I Configure Inter-Chassis Link Aggregation?

The following example uses CE8800, CE7800, CE6800, and CE5800 series switches. In Figure 22-74, SwitchA and SwitchB set up a stack and connect to SwitchC through inter-chassis link aggregation.
Figure 22-74 Configuring inter-chassis link aggregation
The configuration procedure is as follows:
  1. Configure an inter-chassis Eth-Trunk in the stack.
    <iStack> system-view
    [~iStack] interface eth-trunk 1
    [*iStack-Eth-Trunk1] trunkport 10ge 1/0/1
    [*iStack-Eth-Trunk1] trunkport 10ge 2/0/1
    [*iStack-Eth-Trunk1] commit
    
  2. Configure the Eth-Trunk on SwitchC.
    <SwitchC> system-view
    [~SwitchC] interface eth-trunk 1
    [*SwitchC-Eth-Trunk1] trunkport 10ge 1/0/1
    [*SwitchC-Eth-Trunk1] trunkport 10ge 1/0/2
    [*SwitchC-Eth-Trunk1] commit
    
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 607723

Downloads: 2950

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next