No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Configure the CE Series Switches to Ignore the Destination MAC Address of Packets for Layer 3 Forwarding?

How Can I Configure the CE Series Switches to Ignore the Destination MAC Address of Packets for Layer 3 Forwarding?

During network maintenance, traffic is often mirrored and then forwarded to a specific device for analysis. In most cases, a device forwards only packets whose destination MAC address is the local Layer 3 interface's MAC address according to routes, and forwards other packets at Layer 2 or discards other packets. If necessary, the device can also forward other packets at Layer 3 after it is configured to ignore the destination MAC address of packets.

# Configure the device to ignore the destination MAC address of packets.

Only the CE12800, CE6870EI and CE6875EI support this configuration.

<HUAWEI> system-view
[~HUAWEI] ip routing ignore-mac
[*HUAWEI] commit
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616567

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next