No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Clear the Stack Configuration?

How Do I Clear the Stack Configuration?

Clearing CE12800, CE12800E, or CE16800 Stack Configuration

To clear stack configuration of a CE12800, CE12800E, or CE16800 switch, disable the stacking function on this switch. After the stacking function is disabled on the switch, the switch restarts with zero configuration.

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] undo stack enable member all

Clearing CE8800, CE7800, CE6800, and CE5800 Stack Configuration

To clear stack configuration of CE8800, CE7800, CE6800, and CE5800, delete the stack configuration one by one using commands, set the stack member ID to 1, and restart the switch. If other service configurations do not need to be retained, clear the configuration file for the next startup and restart the switch.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616542

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next