No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
After a Traffic Policy Defining an ACL Rule and Traffic Statistics Is Applied and Traffic Matches the ACL Rule, the Statistics in the display acl Command Output Is 0. Why?

After a Traffic Policy Defining an ACL Rule and Traffic Statistics Is Applied and Traffic Matches the ACL Rule, the Statistics in the display acl Command Output Is 0. Why?

The display acl displays statistics on traffic sent to the control plane.

The traffic statistics function is used to collect statistics on traffic in the forwarding plane. The statistics do not contain traffic sent to the control plane.

After a traffic policy defining an ACL rule and traffic statistics is applied and traffic matches the ACL rule, the statistics in the display acl command output is 0.

Run the display traffic-policy statistics command to check statistics on traffic matching a traffic policy applied to an interface.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616661

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next