No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Are Stack Cables Connected for CE8800, CE7800, CE6800, and CE5800 Series Switches?

How Are Stack Cables Connected for CE8800, CE7800, CE6800, and CE5800 Series Switches?

Each CE8800, CE7800, CE6800, and CE5800 series switch has two logical stack ports. The stack ports are Stack-Portn/1 and Stack-Portn/2, where n indicates the stack member ID of a switch. Multiple physical member ports can be added to a logical stack port.

Member switches can be connected using a ring or chain topology. There is no requirement on the sequence in which logical stack ports are connected.
Figure 22-73 Stack cable connections
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 615829

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next