No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can I Perform Loopback Detection on an Interface to Check Whether Packet Loss Occurs on the Link?

Can I Perform Loopback Detection on an Interface to Check Whether Packet Loss Occurs on the Link?

After loopback detection is enabled on an interface of a CloudEngine switch, a test packet sent from the interface is sent back to the interface inside the system. This function can only be used to check whether the interface functions properly, that is, this function cannot be used to check packets sent and received on this interface or check whether packet loss occurs on the link.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 612091

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next