No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Add the Storage Device and Server to a Zone?

How Do I Add the Storage Device and Server to a Zone?

On an FCoE network, you can use zones to control access between ENodes to improve the network security.

A zone contains multiple members, and ENodes can join different zones. Members in the same zone can communicate with each other, whereas members in different zones cannot.

Member nodes can be added to a zone based on the WWPN, WWNN, FC_ID, and FC or FCoE interface. The WWPN mode is recommended.

<HUAWEI> system-view
[~HUAWEI] zone zone1
[*HUAWEI-zone-zone1] member wwpn 20:00:00:9f:be:30:20:10
[*HUAWEI-zone-zone1] quit
[*HUAWEI] commit
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 615765

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next