No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Load a License for a Stack System?

How Do I Load a License for a Stack System?

The following describes the procedure for loading a license in a stack system:
  1. Apply for a license and upload the license file to the stack master.

    A license is bound to the ESN of a physical device. Each stack member has an independent ESN. You can apply for the same license for multiple ESNs or apply for a license for each ESN. In a stack, you need to apply for and load the same license for each stack member.

    If there are multiple .dat license files, compress all the license files into a .zip file and upload the .zip file to the stack master.

    The file name extension of a license file for the CE16800, CE12800 and CE12800E series switches running V200R019C00 or a later version is .xml.

  2. Run the license active file-name command in the user view to activate the uploaded license file.

  3. Run the display license command to check whether a license file has been loaded. If the license status is Normal, the license file has been successfully loaded.

The following example describes how to load licenses in a stack of CE8800, CE7800, CE6800, and CE5800 series switches.
  • If there are multiple license files:
    Compress multiple .dat license files into a .zip file, upload and load the .zip file to the stack master.
    <HUAWEI> license active
  • If there is only one license file:
    <HUAWEI> license active license_file.dat
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 613382

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next