No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Causes

Common Causes

This fault commonly results from one of the following causes:

  • The BFD is faulty.
  • The other device is faulty.
  • The CPU usage on the MPU or interface board of the faulty device is too high.
  • The link is faulty.
  • The interface is not Up.
  • The IP addresses of the two devices on both ends of the link are on different network segments.
  • The router IDs of the two devices conflict.
  • The area types of the two devices are inconsistent.
  • OSPF parameters settings of the two devices are inconsistent.
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608507

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next