No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Causes

Common Causes

This fault is commonly caused by one of the following:
  • On the inbound interface, packets do not enter queues corresponding to the priority of packets.
  • The type of the priority trusted by the inbound or outbound interface is incorrect.
  • The priority mapping configured in the DiffServ domain trusted by the inbound or outbound interface is incorrect.
  • There are configurations affecting priority mapping on the inbound or outbound interface.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608350

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next