No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Do CE Series Switches of Different Models Use the Same System Software Package?

Do CE Series Switches of Different Models Use the Same System Software Package?

A device must run the system software package that matches the device model.

  • The system software package used by the CE12800E series switches is different from that used by the CE12800 series switches. (The file name extension of the system software package is .cc.)

    The system software package of V200R002C50SPC800 is used as an example.
    • The system software package used by the CE12800E series switches is named as CE12800E-V200R002C50SPC800.cc.

    • The system software package used by the CE12800 series switches is named as CE12800-V200R002C50SPC800.cc.

    The system software of the CE12800E equipped with the ED-E, EG-E, or EGA-E series cards is different from that of the CE12800E equipped with the FD-X series cards. For example, the name of the system software is CE12800E-V200R005C00.cc when the ED-E, EG-E, or EGA-E series cards are installed, and the name of the system software is CE12800E-X-V200R005C10.cc when the FD-X series cards are installed. Supported configurations differ depending on the system software. Before replacing the system software, verify that the current configurations match the system software of the device.

  • CE8800, CE7800, CE6800, and CE5800 series switches of EI/HI/LI models have corresponding system software packages that are named based on the switch models.

    For example:
    • CE7850EI-V100R003C00SPC600.cc

    • CE6810EI-V100R003C00SPC600.cc

    • CE6850EI-V100R003C00SPC600.cc

    • CE5810EI-V100R003C00SPC600.cc

    • CE5850EI-V100R003C00SPC600.cc

    • CE5850HI-V100R003C00SPC600.cc

    Some models are further classified into the optical and electrical models. For example, for CE6870EI series switches, the system software package used by the CE6870-48T6CQ-EI is different from that used by other CE6870EI switches.
    • The system software package used by the CE6870-48T6CQ-EI is named as CE6870T-EI-V200R002C50SPC800.cc.

    • The system software package used by other CE6870EI switches is named as CE6870S-EI-V200R002C50SPC800.cc.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616566

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next