No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Pro X6800 Server HMM Command Reference 11
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the underlying management software Hyper Management Module (HMM).

After reading this document, you can learn about the HMM functional modules, functions provided by each module, relationships between the modules, and all operation commands used on the HMM.

This document is used for the management module of FusionServer Pro X6800 server.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

This document describes commands for network deployment and maintenance of Huawei equipment.

This document does not include the commands for production, assembly, or detection of returned or repaired parts.

Incorrect use of the commands for engineering or fault location may cause device exceptions or service interruption. Contact Huawei technical support if you need to use these commands.

Only the professional or qualified personnel who can identify dangers in the server field can run the commands described in this document.

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

11

2019-10-31

Updated Upgrading the Firmware (upgrade).

10

2019-08-03

Changed the document name.

09

2018-10-26

Updated About This Document.

08

2018-05-28

Updated HMM Commands.

07

2018-03-30

Updated About This Document.

06

2017-04-07

Updated Fan Commands.

05

2017-02-20

Updated Setting the HMM or Server Node Management Network Port IPv6 Gateway (gateway6).

04

2016-11-20

Updated Setting the Server Node Management Network Port Mode (netmode), Setting the Server Node Management Network Port Active iBMC Port (activeport), and Setting a VLAN ID for a Server Node Management Network Port (vlan).

03

2015-11-10

Updated Querying the Health Event Information About the System (healthevents).

02

2015-07-13

Updated Recovering the Default HMM Configuration.

01

2014-11-27

This issue is the first official release.

Translation
Download
Updated: 2019-11-19

Document ID: EDOC1000066338

Views: 66271

Downloads: 791

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next