No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Features

Features

Flexible Configuration

  • The basic 4U architecture incorporates blade server advantages, allowing you to configure single-slot, dual-slot, four-slot, or eight-slot server nodes.
  • The X6800 supports flexible configuration, including configuration of pure compute nodes, configuration of GPU acceleration nodes, and mixed configuration of compute and storage nodes.

High Computing Density

  • The X6800 provides computing density twice that of a conventional 1U rack server and four times that of a conventional 2U rack server in a rack, which improves space utilization in equipment rooms.
  • The X6800 provides twice storage density of a conventional 1U rack server in a rack. If each X6800 server is configured with four CPUs, a cabinet supports 480 3.5-inch hard disks in full configuration.
  • A cabinet supports up to 80 single-slot server nodes, with up to 160 processors and a maximum memory capacity of 80 TB.

Simplified Management and Easy Maintenance

  • The X6800 uses the integrated baseboard management controller (iBMC) and Hyper management module (HMM) to implement unified management. By incorporating advantages of rack and blade servers, the X6800 allows nodes to be maintained from the front of the cabinet and supports both front and rear cabling. This meets deployment requirements of traditional equipment rooms (requiring rear cabling) and new equipment rooms (requiring front cabling) and facilitates maintenance of the cool wind area.
  • The X6800 adopts a modular design and supports hot-swappable components, greatly increasing O&M efficiency.

Shared Architecture and High Energy Efficiency

  • The server nodes share four PSUs and five fan modules, which simplifies deployment and increases PSU and fan module utilization.
  • The X6800 uses Huawei Dynamic Energy Management Technology (DEMT) to control system energy consumption, which maximizes the energy efficiency.

Redundancy and Reliability

  • The X6800 uses a passive backplane to protect the system from single point of failures (SPOFs), delivering higher reliability and security than an active backplane.
  • The X6800 supports redundant fan modules and PSUs and RAID configuration, preventing data loss and service interruption.
  • The X6800 uses carrier-class components and manufacturing processes to provide higher stability and longer lifecycle.
Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 30143

Downloads: 1686

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next