No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ports

Ports

This topic describes the ports on the X6800.

Front Panel

Figure 2-7 shows the ports on the X6800 front panel.

Figure 2-7 ports on the X6800 front panel (4U8 Server Node)

No.

Name

Type

Quantity

Description

1

Universal connector port (UCP) of a server node

-

8

The universal connector port on the front panel connects to a high-density cable that provides one DB-15 video graphics array (VGA) connector, three USB 2.0 connectors, and one RJ45 serial connector.

2

Management network port of a server node

RJ45

8

The RJ45 port on the front panel is a 1000 Mbit/s Ethernet port and used to manage the server node.

NOTE:

The intelligent baseboard management controller (iBMC) has two types of network ports: management network port and shared network port. A service network port with the network controller sideband interface (NCSI) function enabled can function as a shared network port.

3

Network port of a server node

-

16

The Flexible NIC on the front panel provides two or four GE ports, two 10GE ports, or two 10GE Base-T ports.

4

Converged management network port (front)

RJ45

1

The 1000 Mbit/s Ethernet port is used to manage the server.

Rear Panel

Figure 2-8 shows the ports on the X6800 rear panel.

Figure 2-8 ports on the X6800 rear panel (4U4 Server Node)

No.

Name

Type

Quantity

Description

1

Power input socket

-

4

Power input socket through which power is supplied to the server.

2

Converged management network port (rear)

-

1

The 1000 Mbit/s Ethernet port is used to manage the server.

3

Server serial port

DB9

1

The port is used as the system serial port by default. You can set it to the iBMC serial port by using the iBMC command. The port is used for debugging.

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 32857

Downloads: 1691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next