No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators

Indicators

This topic describes the indicators and buttons on the X6800.

You can observe the indicators to determine the status of the X6800.

Front Panel

Figure 2-9 describes the indicators on the X6800 front panel.

Figure 2-9 Indicators on the X6800 front panel (4U8 Server Node)

No.

Silk Screen

Name

State Description

1

Health status indicator

  • Steady green: The server is operating properly.
  • Blinking red at 1 Hz: A major alarm is generated.
  • Blinking red at 5 Hz: A critical alarm is generated.

2

UID indicator

  • Off: The chassis is not located.
  • Steady blue/Blinking blue: The chassis is located.

3

-

Converged management network port (front) link indicator

  • Off: The port is not in use.
  • Steady green: The port is properly connected.

4

-

Converged management network port (front) active indicator

  • Off: No data is being transmitted.
  • Blinking orange: Data is being transmitted.

Rear Panel

Figure 2-10 describes the indicators on the X6800 rear panel.

Figure 2-10 Indicators on the X6800 rear panel (4U4 Server Node)

No.

Silk Screen

Name

State Description

1

-

Power Operating status indicator

  • Off: There is no power supply, or the PSU is abnormal.
  • Steady green: The PSU is operating properly.

2

-

Fan Operating status indicator

  • Off: There is no power supply to the fan module.
  • Steady green: The fan module is operating properly.
  • Steady red: A fault alarm is generated.

3

Health status indicator

  • Off: There is no power supply to the management module, or the management module is abnormal.
  • Steady green: The management module is operating properly.

4

UID indicator

  • Off: The chassis is not located.
  • Steady green: The chassis is located.

5

ACT

Active/standby switchover indicator

  • Off: The management module is in the standby state.
  • Steady Orange: The management module is in the active state.

6

-

Converged management network port (rear) link indicator

  • Off: The port is not in use.
  • Steady green: The port is properly connected.

7

-

Converged management network port (rear) active indicator

  • Off: No data is being transmitted.
  • Blinking orange: Data is being transmitted.
Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 38130

Downloads: 1722

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next