No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Chassis Specifications

Chassis Specifications

Chassis Specifications

Table 2-6 lists the X6800 technical specifications.

Table 2-6 Chassis Specifications




The X6800 is a 4 U-height multi-node server.

Node supported

The X6800 supports eight 4U8 nodes, or four 4U4 nodes.

PCIe slot

The rear panel of the X6800 provides a maximum of eight PCIe x8 slots.

Management interface

  • The mounting ear provides an aggregation management network port.
  • The HMM provides an aggregation management network port.


The X6800 provides four 750 W/1200 W/1500 W AC (HVDC) PSUs or 800 W DC PSUs.

  • The X6800 PSUs support 1 + 1 and 2 + 2 redundancy modes. Select the PSUs based on the X6800 configuration and the PSU redundancy requirements.
  • If the XH628 v3 is configured, the X6800 supports N+N PSU redundancy mode. If the XH622 v3/XH620 v3 is configured, calculate the power consumption based on the configuration and determine whether N+N PSU redundancy mode is supported.

Fan module

The rear chassis of the X6800 provides five fan modules working in N + 1 redundancy.

Dimensions (W x D x H)

448 mm x 898 mm x 175 mm


The minimum cabinet depth is 1.2m (47.2in.).


  • Net weight: 29 kg (63.95 lb)
  • Fully-configured with XH628 V3: 109 kg (240.35 lb)
  • Fully-configured with XH622 V3: 69 kg (152.15 lb)
  • Fully-configured with XH620 V3: 77 kg (169.79 lb)
  • Package weight: 6.5 kg (14.33 lb)
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 38182

Downloads: 1724

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next