No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Flexible CMA

Installing a Flexible CMA

This topic describes how to install a flexible cable management arm (CMA) in the chassis.

Operation Scenario

A CMA needs to be installed in the chassis.

Prerequisites

  1. Precautions

    The chassis and all components in the chassis have been installed.

  2. Preparations
    • At least 1U space is reserved under the chassis for which a CMA is to be installed.
    • The CMA has been unpacked and placed near the chassis.
  3. Tools
    • Phillips screwdriver: used to tighten screws.
    • ESD wrist strap or ESD gloves: used to prevent ESD damage.

Procedure

  1. Wear an ESD wrist strap or ESD gloves.
  2. Take the CMA out of the ESD bag, and raise the ejector lever.
  3. Align the CMA with the chassis slot and insert the CMA into the slot. See step (1) in ‎Figure 3-14.

    The CMA falls and the latch is fastened automatically.

  4. Tighten the two screws using a Phillips screwdriver to secure the CMA. See step (2) in Figure 3-14.
  5. Lift the CMA until the ejector levers are fastened. See step (3) in Figure 3-14.

    Figure 3-14 Installing a CMA

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 29780

Downloads: 1686

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next