No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a Converged Management Network Cable

Connecting a Converged Management Network Cable

This topic describes how to connect a converged management network cable.

The server supports converged management by using the converged management ports provided by the management module and mounting ear.

NOTE:

You need to connect only one converged management port on a server.

Select an appropriate converged management port based on device cabling:

  • For front cabling, connect to the converged management port (front) on a mounting ear.
  • For rear cabling, connect to the converged management port (rear) on the management module.
  • You are advised to use a shielded twisted pair (STP) Ethernet cable to connect to a converged management port to achieve high network performance and electromagnetic compatibility (EMC).

Connect a converged management network cable using either of the following methods:

  • Figure 3-23 shows how to connect a converged management network cable to the port on the management module.
Figure 3-23 Connecting a converged management network cable to the port on the management module

  • Figure 3-24 shows how to connect a converged management network cable to the port on a mounting ear.
Figure 3-24 Connecting a converged management network cable to the port on a mounting ear

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 38003

Downloads: 1720

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next