No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Recovering the Default HMM Configuration

Recovering the Default HMM Configuration

Scenario

If you forget the HMM password or IP address, you can use the jumper restoration method to recover the default HMM configuration.

NOTICE:

This function is available only for personnel authorized by Huawei and Huawei technical support personnel.

Procedure

  1. Power off the HMM and remove the HMM from the chassis.
  2. Use a jumper cap or other tools to short the third pair of jumper pins in Figure 4-12.

    Figure 4-12 Jumper position

  3. Keep the jumper pins shorted, install the HMM to the chassis, and power on the HMM.
  4. After the HMM is started, use the default parameters to log in to the HMM command-line interface (CLI).

    • The default IP address:
      • 10.10.1.200 (HMM V1.62 and later)
      • 192.168.2.1 (Earlier than HMM V1.62)
    • The default user name: root
    • The default password: Huawei12#$

  5. Modify the user name and password as required and record the information.

Follow-up Procedure

After the configuration is complete, remove the jumper cap or other short circuit tools.

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 32914

Downloads: 1691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next