No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Parts Replacement

Parts Replacement

About This Chapter

This section describes how to replace server components.

NOTICE:
  • After parts replacement, the software, firmware, and CPLDs on the new components must be upgraded to the version used in the customer environment or to the latest version. It is recommended that the version be upgraded to the version used in the customer environment. For details, see the X6800 Server V100R003 Upgrade Guide and HUAWEI Server Firmware Upgrade Guide.
  • After the components are replaced, restore their configurations (including BMC, BIOS, and RAID configurations) on the customer live network.
Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 32128

Downloads: 1691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next