No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering On

Powering On

This topic describes how to power on the chassis.

Operation Scenario

Devices and cables are properly installed.


  1. Switch on the AC power distribution box (PDB) that maps to the chassis.
  2. Switch on the busbar of the rack.
  3. Power on the server nodes. For details, see the power-on sections of their user guides.
  4. Observe the status of chassis indicators.

    The chassis is powered on successfully if the PSU indicator is steady green.

Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 38085

Downloads: 1722

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next