No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R003 User Guide 13

This document describes the Huawei X6800 server (X6000 for short) in terms of its appearance, features, specifications, system components, device installation, cable connections, and installation verification.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server Over a Serial Port by Using PuTTY

Logging In to a Server Over a Serial Port by Using PuTTY

This topic describes how to log in to a server over a serial port by using PuTTY.

Scenarios

Log in to a server over a serial port by using PuTTY in the following scenarios:

  • The server is configured for the first time at a new site, and you need to perform initial configuration.
  • The server cannot be remotely connected to because the network is faulty, and you need to locate the fault.

Prerequisites

Conditions

  • A PC is connected to the server by using a serial cable.
  • PuTTY 0.60 or later has been installed.

Data

You have obtained the following data:

  • User name for logging in to the server node to be connected
  • Password for logging in to the server node to be connected

Software

PuTTY.exe: a piece of third-party free software.

Procedure

  1. Double-click PuTTY.exe.

    The PuTTY Configuration window is displayed.

  2. In the navigation tree, choose Connection > Serial.
  3. Set the login parameters.

    The following are the examples:

    • Serial line to connect to: COMn
    • Speed (baud): 115200
    • Data bits: 8
    • Stop bits: 1
    • Parity: None
    • Flow control: None

    n indicates the serial port number, and the value is an integer.

  4. In the navigation tree, choose Session.
  5. Select Connection type in Serial, as shown in Figure 7-2.

    Figure 7-2 PuTTY Configuration window

  6. Click Open.

    The PuTTY window and login as: are displayed, waiting for you to enter a user name.

  7. Enter a user name and password by following instructions.

    After login, the server host name is displayed on the left of the prompt.

Translation
Download
Updated: 2018-09-06

Document ID: EDOC1000066339

Views: 37867

Downloads: 1720

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next