No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (Earlier Than V250) User Guide 29

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the server management software Intelligent Baseboard Management Controller (iBMC). It includes the following:

  • Functions and features of the iBMC
  • iBMC web user interface (WebUI)
  • iBMC command line interface (CLI)
  • Commands used on the iBMC
NOTE:

This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:

  • Commands for server manufacturing, assembling, and factory inspection and repair.
  • Commands for engineering implementation or fault locating.

Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.

This document applies to X6800 XH620 V3, XH622 V3, XH628 V3 server nodes.

Intended Audience

This document is intended for:

  • Server installation engineers
  • Server maintenance engineers

The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.

Symbol Conventions

The following table lists the symbols that may be found in this document.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Updates between document issues are cumulative. Therefore, the latest document issue contains all updates made in previous issues.

Issue

Date

Description

29

2019-02-22

Updated Querying and Setting Syslog (syslog -d state).

28

2018-11-05

Updated Upgrade Firmware and Remote.

27

2018-08-08

Updated Logging In to the iBMC WebUI and Remote Virtual Console.

Added Importing the iBMC Trust and Root Certificates.

26

2018-07-05

Updated Alarm Settings and Service Settings.

25

2018-06-07

Updated Restoring Default iBMC Settings.

Added Logging In to a Server Using the IRC (Red Hat).

24

2018-05-30

Updated Restoring Default iBMC Settings.

23

2018-03-29

Updated Power Control, Energy Saving Settings, and Setting the Disk Locate Indicator Status (locate).

22

2018-02-28

Updated U-Boot Command List.

21

2018-02-11

Updated Table 2-38.

20

2017-12-28

Optimized the "Local Users" section.

19

2017-11-13

This issue is the nineteenth official release.

18

2017-08-14

This issue is the eighteenth official release.

17

2017-06-30

This issue is the seventeenth official release.

16

2017-05-20

This issue is the sixteenth official release.

15

2017-04-07

This issue is the fifteenth official release.

14

2017-03-10

This issue is the fourteenth official release.

13

2017-02-27

This issue is the thirteenth official release.

12

2017-02-20

This issue is the twelfth official release.

11

2017-01-05

This issue is the eleven official release.

10

2016-10-27

This issue is the tenth official release.

09

2016-09-10

This issue is the ninth official release.

08

2016-03-20

This issue is the eighth official release.

07

2016-01-07

This issue is the seventh official release.

06

2015-11-10

This issue is the sixth official release.

05

2015-07-13

This issue is the fifth official release.

04

2015-03-20

The iBMC user guide is merged into one.

03

2014-12-24

The product names are changed.

02

2014-10-25

This issue is the second official release.

01

2014-06-05

This issue is the first official release.

Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000066341

Views: 115188

Downloads: 1073

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next