No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (Earlier Than V250) User Guide 29

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Help Information (help)

Viewing Help Information (help)

Function

The help command is used to view help information.

Format

help

[command] --help

Parameters

Parameter Description Value
command The command is to be queried. -

Usage Guidelines

None

Example

# View the commands supported in the current path.

iBMC:/->help                                                                   
DMTF SMASH CLP Commands:
help      : Used to get context sensitive help.
show      : Used to display values of properties and contents of a collection targets.
exit      : Used to terminate the CLP session.
ipmcget   : Used to get BMC runtime status.
ipmcset   : Used to set BMC runtime status or send control command.
notimeout : Used to set no timeout limit to login shell.
maint_debug_cli : Used to maintance in debug mode.
ping      : Used to test network status.
ifconfig  : Used to check network device information.
ps        : Used to check processes status.
free      : Used to check memory status.
top       : Used to check system resource used information. None parameter is allowed
df        : Used to check disk used information.
route     : Used to check route information. None parameter is allowed
netstat   : Used to check network port status.

# View the method of using the ping command.

iBMC:/->ping --help                                                             
BusyBox v1.18.4 (2014-08-09 16:28:25 CST) multi-call binary.

Usage: ping [OPTIONS] HOST

Send ICMP ECHO_REQUEST packets to network hosts

Options:
	-4,-6		Force IP or IPv6 name resolution
	-c CNT		Send only CNT pings
	-s SIZE		Send SIZE data bytes in packets (default:56)
	-I IFACE/IP	Use interface or IP address as source
	-W SEC		Seconds to wait for the first response (default:10)
			(after all -c CNT packets are sent)
	-w SEC		Seconds until ping exits (default:infinite)
			(can exit earlier with -c CNT)
	-q		Quiet, only displays output at start
			and when finished 
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000066341

Views: 132692

Downloads: 1081

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next