No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6800 Server iBMC (Earlier Than V250) User Guide 31

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the DNS on the iBMC WebUI (Manually)

Configuring the DNS on the iBMC WebUI (Manually)

Operation Scenario

On the Network Settings page of the iBMC WebUI, you can configure the Domain Name System (DNS) so that users can use domain name addresses to access the iBMC.

NOTE:
  • A domain name address is the combination of a host name and a domain name. For example, if the host name is huawei and the domain name is manager.com, the domain name address is huawei.manager.com.
  • The DNS is a distributed database specifies the mapping between domain names and IP address for the Internet. It enables users to access the Internet without memorizing IP addresses that can be directly read by hosts.

Prerequisites

Data

Obtain the following information:

  • The iBMC host name.
  • DNS server information:
    • The address of a DNS server
    • The domain name of a DNS server

Procedure

  1. Log in to the iBMC WebUI. For details, see Logging In to the iBMC WebUI.
  2. Choose Config > Network Settings.
  3. In the Config iBMC Host Name area, set Server Name to the iBMC host name, for example, huawei.
  4. Click Save.
  5. Choose Config > Network Settings.
  6. In the Set DNS Parameters area, click Manually set DNS address.

    After clicking Manually set DNS address, you can manually configure the DNS server domain name, preferred DNS server address, and alternate DNS server address.

  7. Set the DNS address.
    1. Set Domain to the DNS server domain name, for example, manager.com.
    2. Set Preferred Server to the IP address of the preferred DNS server, for example, 192.168.66.66.
    3. Set Alternate Server to the IP address of the alternate DNS server.
    4. Click Save.
  8. On the local PC connected to the iBMC, set the local DNS address to the DNS server address.

    Ensure that the local DNS address is the same as the iBMC DNS address. Otherwise, the local PC cannot connect to the iBMC over the Internet.

  9. In the address box on the browser, type the domain name address, for example, huawei.manager.com, and press Enter. If the iBMC WebUI is displayed, the configuration is successful.
Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000066341

Views: 180796

Downloads: 1092

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next