No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (Earlier Than V250) User Guide 29

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server Using the IRC (Windows)

Logging In to a Server Using the IRC (Windows)

Scenarios

Use the independent remote console (IRC) to remotely access a server from a client running Windows.

Prerequisites

Conditions

The client (for example, a PC) is connected to the iBMC management network port of the server to be accessed.

Data

  • iBMC IP address and port number (HTTPS port number)
  • User name and password for logging in to the iBMC

Software

The IRC software package is downloaded and decompressed on the client.

Procedure

  1. Configure an IP address for the client to enable communication between the client and the iBMC.

    The IP address configured for the PC and the iBMC management network port IP address must be in the same network segment.

  2. Double-click KVM.exe.

    A dialog box similar to the one shown in Figure 2-45 is displayed.

    Figure 2-45 Login interface

  3. Enter the network address, user name, and password.

    The network address can be in any of the following formats:

    • iBMC [IPv6 address]:Port number or iBMC IPv4 address:Port number

      For example, [2001::64]:444 or 192.168.100.1:444

      NOTE:

      The default port number 443 can be omitted.

    • iBMC domain name address:Port number

  4. Select the login mode, and click Connect.

    • Private Mode: allows only one user to access and manage the server at a time.
    • Shared Mode: allows two users to access and manage the server at the same time. The two users can see each other's operations.

    Information shown in Figure 2-46 is displayed.

    Figure 2-46 Security warning
    NOTE:

    If no CA certificate is installed, click Import CA to import a CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

  5. Click Yes to open the remote console.

    The Remote Virtual Console of the server is displayed, as shown in Figure 2-47.

    Figure 2-47 Remote Virtual Console

Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000066341

Views: 133221

Downloads: 1081

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next