No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6800 Server iBMC (Earlier Than V250) User Guide 32

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Operation Interfaces

Common Operation Interfaces

The iBMC supports a variety of operation interfaces, such as the IPMI for internal communication, the SNMP interface for interworking with the upper-layer network management system, and single-server operation interfaces. The following describes the common operation interface for single server management.


The iBMC web user interface (WebUI) provides an intuitive interface for users to perform server management. Similar tasks are grouped for easy navigation and workflow. The iBMC WebUI provides the Information, Alarm & SEL, Diagnostics, Power, Configuration, System, and Remote Console modules. The navigation tree in the left further divides the tasks in each module.

When using the iBMC WebUI, you can click at the upper right corner of the page to obtain help information.

You can select the language to be used from the text box at the upper right corner of the page.

For more details, see Overview of the Web Interface.


The iBMC command-line interface (CLI) provides the ipmcset command for set operations and the ipmcget command for query operations. You can perform operations on the iBMC through the CLI.

For details, see Introduction of CLI.

Redfish Interface

The iBMC supports the standard Redfish interface. The Redfish client (Redfish interface tool, for example, Chrome Postman) sends HTTPS operation requests to the server, and implements information query, configuration, and monitoring of the server using the GET, PUT, PATCH, POST, and DELETE commands.

For details, see Huawei Server iBMC Redfish API Description.

iBMC SmartServer Mobile

SmartServer Mobile is a mobile application that allows users to access the Huawei server iBMC using a mobile device. SmartServer Mobile directly interacts with the iBMC to implement configuration and monitoring of services.

For details, see Huawei Server SmartServer Mobile User Guide.

Updated: 2019-11-19

Document ID: EDOC1000066341

Views: 206891

Downloads: 1095

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next