No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (Earlier Than V250) User Guide 30

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Credentials

Default Credentials

Table 3-1 lists the default credentials for the iBMC. The default credentials are used for first login or login after you restore the iBMC to factory settings. For security purposes, change the default password at the first login and change your password periodically.

Table 3-1 Default credentials

Parameter

Default Value

iBMC user name and password

User name: root

Password: Huawei12#$

iBMC management port IP address

10.10.1.10N

NOTE:

N indicates the slot No. of the server node. For details about the mapping between server node slot numbers and default IP addresses, see the user guide of the server you use.

U-Boot password

Huawei12#$

SNMP read-only community name

roAdmin12#$

SNMP read-write community name

rwAdmin12#$

Trap community name

TrapAdmin12#$

Translation
Download
Updated: 2019-06-04

Document ID: EDOC1000066341

Views: 145379

Downloads: 1083

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next