No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6800 Server iBMC (Earlier Than V250) User Guide 32

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server Using the Independent Remote Console (Ubuntu)

Logging In to a Server Using the Independent Remote Console (Ubuntu)


The independent remote console allows you to remotely access and manage a server from a local PC.

This topic describes how to use the independent remote console running on Ubuntu to log in to a server.



The client (for example, a PC) is connected to the iBMC management network port of the server to be accessed.


  • iBMC management network port IP address and port number (HTTPS port number)
  • User name and password for logging in to iBMC


You have downloaded the tool software package to the client (PC) and decompressed it.


  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC. That is, the IP address configured and the iBMC management network port IP address must be in the same network segment.
  2. Open the console, and set the folder, in which the independent remote console is stored, as the working folder.
  3. Run the chmod 777 command to set the permission for the independent remote console.
  4. Run ./ to start the independent remote console. The independent remote console interface is displayed, as shown in Figure 3-42.

    Figure 3-42 Login interface

  5. Enter the network address, user name, and password as instructed.

    The network address can be in any of the following formats:

    • iBMC management network port IP address (IPv4 or IPv6 address):Port number
    • iBMC domain name address:Port number
    • Enter an IPv6 address in brackets, and an IPv4 address directly. For example, [2001::64]:444, and
    • The default port number 443 can be skipped.

  6. Select the login mode, and click Connect.

    • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
    • Private Mode: allows only one user to access and manage a server.

    Information shown in Figure 3-43 is displayed.

    Figure 3-43 Security risk information

  7. Perform any of the following operations based on actual situation:

    • Click Yes to open the KVM console.
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The Remote Virtual Console of the server is displayed, as shown in Figure 3-44.

    Figure 3-44 The Remote Virtual Console of the server

Updated: 2019-11-19

Document ID: EDOC1000066341

Views: 206812

Downloads: 1095

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next