No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6800 Server iBMC (Earlier Than V250) User Guide 32

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server Using the IRC (macOS)

Logging In to a Server Using the IRC (macOS)


Use the independent remote console (IRC) to remotely access a server from a client running macOS.



The client (for example, a PC) is connected to the iBMC management network port of the server to be accessed.


  • iBMC IP address and port number (HTTPS port number)
  • User name and password for logging in to the iBMC


The IRC software package is downloaded and decompressed on the client.


  1. Configure an IP address for the client to enable communication between the client and the iBMC.

    The IP address configured for the PC and the iBMC management network port IP address must be in the same network segment.

  2. Open the console and specify the folder in which the IRC is stored as the working folder.
  3. Run the chmod 777 command to set the permission for the IRC.
  4. Run ./ to start the IRC.

    A dialog box similar to the one shown in Figure 2-51 is displayed.

    Figure 2-51 Login interface

  5. Enter the network address, user name, and password.

    The network address can be in any of the following formats:

    • iBMC [IPv6 address]:Port number or iBMC IPv4 address:Port number

      For example, [2001::64]:444 or

      The default port number 443 can be omitted.

    • iBMC domain name address:Port number

  6. Select the login mode, and click Connect.

    • Private Mode: allows only one user to access and manage the server at a time.
    • Shared Mode: allows two users to access and manage the server at the same time. The two users can see each other's operations.

    Information shown in Figure 2-52 is displayed.

    Figure 2-52 Security warning

    If no CA certificate is installed, click Import CA to import a CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

  7. Click Yes to open the remote console.

    The Remote Virtual Console of the server is displayed, as shown in Figure 2-53.

    Figure 2-53 Remote Virtual Console

Updated: 2019-11-19

Document ID: EDOC1000066341

Views: 206796

Downloads: 1095

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next