No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6800 Server iBMC (Earlier Than V250) User Guide 32

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Getting Started

Getting Started

Basic Operations

Table 2-2 describes the basic operations on the iBMC WebUI.

Table 2-2 Basic operations



Select a language.

On the login page, select the language to be used from the drop-down list.

View server basic information.

Choose Information > Summary.

The Basic Info area lists server information, including:

  • Server model and serial number
  • IP address and firmware version of the iBMC
  • BIOS firmware version and globally unique identifier (GUID)
  • Maximum web session allowed and the number of online users
  • Alarm and indicator status

Obtain online help information.

On the System page, click .

Query user information.

After you log in to iBMC, click the user name (for example, root) next to in the upper right corner.

The Current User Info window is displayed, showing the user information.

View alarm information.

Click an alarm icon in the upper right corner of the iBMC WebUI.

The Current Alarms page is displayed, showing the severity, description, error code of the alarm, the time when the alarm was generated, and suggestions on how to clear the alarm.

Log out of the iBMC WebUI.

Click Logout in the upper right corner.

Refresh the current page.

Click in the upper right corner of the iBMC WebUI.

Updated: 2019-11-19

Document ID: EDOC1000066341

Views: 208018

Downloads: 1100

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next