No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RCS Directory

RCS Directory

This section describes how to configure an RCS directory.


A U-Portal server, an RCS server, and a profile picture server have been established.


The XML Configuration Access Protocol (XCAP) is an application layer protocol that allows a client to read, write, and modify application configuration data stored in XML format on a server.

eSpace 8950 supports the following RCS directory functions:
  • Searching for a contact: On the directory screen, enter your search terms and press the Search softkey. eSpace 7910/eSpace 7950 will search for matching contacts from the RCS server and display the contact information and profile pictures. Then, you can select a contact and place a call or save the contact to your local contact list.
  • Search for the calling or called party' information: After receiving or initiating a call, eSpace 7910/eSpace 7950 searches the local contact list for the calling or called number. If no record is found, eSpace 7910/eSpace 7950 searches the RCS server for the contact and displays the search result including the contact information and profile picture on its LCD screen.

Configuration Methods

You can configure an RCS directory using three different methods, as listed in Table 5-7.
Table 5-7  Configuration methods




Log in to the DMS and deliver the address and port number of the U-Portal server by using the pre-configuration or X event.


On the phone web page, choose Advanced > Server > U-Portal Server and modify Server and Port.


Tap and choose APPLICATIONS > Settings, choose Advanced > Server > Directory Server and modify Server and Port.

Parameter Settings

Table 5-8 lists the directory parameters that you must set.

Table 5-8  Parameter description



How to Set

How to Modify the Configuration File

U-Portal Server

Indicates the address of the U-Portal server.

The value can be an IP address or a domain name.

Example: or

Parameter: UPortalServerAddress

Location: Device > ComCfg > Phone > Server

Example: UPortalServerAddress="" or UPortalServerAddress=""


Indicates the port number of the U-Portal server.

Value range: 0-65535

Default: 80

Parameter: UPortalServerPort

Location: Device > ComCfg > Phone > Server

Example: UPortalServerPort="80"

Directory Server

Indicates the directory type.

Select RCS.

Parameter: NewUsedType

Location: Device > ComCfg > EADDR

  • 0: BMU directory
  • 1: PGM directory
  • 2: LDAP directory
  • 3: RCS directory

Default: 3

Example: Type="3"


Indicates the address of the directory server.

You are advised to use the value delivered by the U-Portal server.

From V200R003C00SPC800, U-Portal supports SRV redundancy and delivers the available directory server address.

Parameter: PrimaryEaddrServerAddress

Location: Device > ComCfg > Phone > Server

Example: PrimaryEaddrServerAddress="" or PrimaryEaddrServerAddress=""

Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 52240

Downloads: 1833

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next