No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Editing the Microsoft AD2008 User

Editing the Microsoft AD2008 User

Prerequisites

The AD server has been installed. For details, see Setting Up the AD and DNS Servers.

Data Plan

The following table lists the user information under the assumption that a domain user under the organizational unit Department needs to be added.

Parameter

Setting

Full name

Bruce

User logon name

Bruce

Password

Bruce123//

Department

test

Job title

manager

Telephone number

12345

Home

11111111

Mobile

13711111111

Procedure

  1. Choose Start > Administrative Tools > Active Directory Users and Computers.

    The Active Directory Users and Computers window is displayed, as shown in Figure 8-45.

    Figure 8-45  Active Directory Users and Computers window

  2. Right-click Department, and choose New > User from the shortcut menu, as shown in Figure 8-46.

    Figure 8-46  Creating a user

  3. Set the Full name, and User logon name parameters, as shown in Figure 8-47.

    Figure 8-47  New Object - User dialog box (1)

    NOTE:
    • Full name is the user name displayed on the phone screen. You can right-click the user and choose Rename from the shortcut menu to change the value of Full name.
    • Full name set here is automatically synchronized to Display name of the user properties. The value of Display name is the value of User Name required in LDAP parameter settings.

  4. Click Next. In the dialog box that is displayed, set Password and Confirm password, and select User must change password at next logon, as shown in Figure 8-48.

    Figure 8-48  New Object - User dialog box (2)

  5. Click Next, and click Finish in the displayed dialog box.
  6. Double-click Bruce.

    The Bruce Properties page is displayed.

  7. Click the General tab. Set Telephone number.
  8. Click the Telephones tab. Set Home and Mobile.
  9. Click the Organization tab. Set Department and Job Title.
Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 47214

Downloads: 1812

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next