No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Instant Conference, Group Conference, and Converged Conference

Instant Conference, Group Conference, and Converged Conference

This section describes how to configure instant conference and group conference services in an IMS+UC and UC2.X network environment as well as the converged conference service in a UC2.X network environment. The IP phone supports interconnection with the converged conference of eSpace EC V300R001 solution from V200R003C00SPCa00.

Prerequisites

  • In the UC2.X network environment, the instant conference service rights have been enabled for the IP phone on the eSpace U1900 series unified gateway. For more information, see the eSpace UC V200R002C00 Product Documentation. Instant, group conference, and converged conferences support PCMA, PCMU, G729, G722, and iLBC codecs.
  • In the IMS+UC network environment, the voice conference function has been enabled for the IP phone. For more information, see the eSpace UC Product Documentation. Instant and group conferences support PCMA, PCMU, G729, and iLBC/8000 codecs.
    NOTE:
    The AA server automatically pushes the conference service rights to the IP phone.

Context

When the IP phone is idle or in a call, a user can initiate an instant conference by pressing the Conf softkey. A user also can initiate a group conference from a contact group by pressing the Conf softkey when the IP phone is idle.

Configuration Methods

You can configure instant conference, group conference, and converged conference services using three different methods, as listed in Table 5-23.
Table 5-23  Configuration methods

Method

Details

eSight

On the eSight management portal, choose Configuration > IP Phone Management, set related parameters on the page that is displayed.

DHCP Option 246

Set related parameters in the configuration file and deliver the new configuration file to the IP phone.

Parameter Settings

The default conference mode of the IP phone can be an instant conference or a local conference, depending on the account rights.

  • If the account has been assigned instant conference rights on both the IP phone and server, the default conference mode is an instant conference.
  • If the account has not been assigned instant conference rights on both the IP phone and server, the default conference mode is a local conference.
NOTE:
Starting from V200R003C00SPC500, you can turn on or off local conference by using Web. When Enable is selected, the default meeting mode of the IP phone keeps unchanged; when Disable is selected, the IP Phone is not allowed to create a local conference.
Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 53197

Downloads: 1840

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next