No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the VLAN

Configuring the VLAN

You can configure the VLAN manually or enable automatic VLAN configuration for eSpace 8950.

Automatic Configuration

The Link Layer Discovery Protocol (LLDP) allows switches to deliver VLAN information carried in LLDP data packets.

The switch in use must support LLDP in order to implement automatic VLAN configuration for eSpace 8950.

To enable LLDP for eSpace 8950 to automatically obtain VLAN information, perform the following steps:

  1. Power on eSpace 8950.

    The phone login screen is displayed.

  2. On the phone login screen or home screen, choose > APPLICATIONS > Settings.
  3. Choose Network Security, enter the administrator password, and click OK.

    NOTE:
    The default administrator password is admin123. To ensure security, change the administrator password at your first login.

  4. Choose Network Access > LLDP-MED.
  5. Press the Enable softkey.

Manual Configuration

Obtain the VLAN ID and priority from the switch before attempting to manually configure VLAN information.

To manually configure VLAN information, perform the following steps:

  1. Power on eSpace 8950.

    The phone login screen is displayed.

  2. Tap and choose APPLICATIONS > Settings.
  3. Choose Network Security, enter the administrator password, and click OK.

    NOTE:
    The default administrator password is admin123. To ensure security, change the administrator password at your first login.

  4. Choose Network Access > VLAN and press the Enable softkey.
  5. Set VLAN ID according to the VLAN ID obtained.
  6. Set VLAN Priority according to the VLAN priority obtained and press OK.
Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 51679

Downloads: 1833

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next