No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an IP Phone Subnet

Creating an IP Phone Subnet

Before connecting IP phones to the eSight and using the configuration and management functions provided by the eSight, create subnets for IP phones. If TR-069 parameters are correctly set on an IP phone, the eSight can automatically add the IP phone to the corresponding IP phone subnet.


You have the right to operate the Resource menu.



You cannot move an IP phonesubnet to an non-IP phone subnet; otherwise, the IP phones under the IP phonesubnet cannot be properly managed through the IP phone management function.

  • You can create lower-level subnets in a subnet.
  • To ensure management performance, do not create subnets of more than 10 levels and control the number of devices in a subnet within 500.
  • If the IP address of an IP phone belongs to the IP address segments of multiple subnets, the eSight adds the IP phone to the subnet with the smallest IP address segment that covers the IP phone's IP address.
  • Once the IP address of an IP phone changes, the eSight automatically moves the IP phone to the matching subnet.


  1. Choose Resource > Add Resource > Add Subnet from the main menu.
  2. Click IP Phone Subnet.

    Figure 4-1  Creating an IP phone subnet

  3. Configure the basic information about the subnet and its manageable IP address segments.
  4. Click OK.


    Click Apply. The subnet is created. You can repeat the preceding operations to create more subnets.

    • If the subnet is created successfully, the Add Subnet Success dialog box is displayed. Click OK in the dialog box.
    • If the subnet fails to be created, the system displays the failure cause. Click OK in the dialog box and set parameters again.


  1. Choose Resource > Resource Group > Subnet from the main menu.
  2. If you can find the new IP phone subnet in the management object list, the IP phone subnet is created successfully.
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 46666

Downloads: 1808

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next