No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Option 246 Parameters

Setting Option 246 Parameters

This topic describes how to set Option 246 parameters on the DHCP server.

Context

The DHCP server has been set up.

Procedure

  1. Choose Start > Administrative Tools > DHCP.

    The DHCP window is displayed.

  2. Click to expand the navigation tree, as shown in Figure 8-25.

    Figure 8-25  DHCP window

  3. Right-click IPV4 and choose Set Predefined Options.

    The Predefined Options and Values dialog box is displayed, as shown in Figure 8-26.

    Figure 8-26  Predefined Options and Values dialog box

  4. Click Add.

    The Option Type dialog box is displayed, as shown in Figure 8-27.

    Figure 8-27  Option Type dialog box

  5. Set parameters (see Table 8-2 for detailed parameter descriptions).

    Table 8-2  Option type parameters
    Parameter Example
    Name ip phone
    Data type String
    Code 246
    Description ip phone auto provision

  6. Click OK.

    The Predefined Options and Values dialog box is displayed.

  7. Click OK.

    The DHCP window is displayed.

  8. Right-click Scope Options and choose Configure Options.

    The Scope Options dialog box is displayed, as shown in Figure 8-28.
    Figure 8-28  Scope Options dialog box (1)

  9. Select option246, as shown in Figure 8-29.

    Figure 8-29  Scope Options dialog box (2)

  10. Set String value to the URL for obtaining the UPF file.

    NOTE:
    The value is in the format of upfprofile.address=http://server IP address/UPF file name, for example, upfprofile.address=http://192.168.1.222/UPF-eSpace7950.xml. The value must not contain spaces or Chinese characters.

  11. Click OK.

    The configuration is complete, and server configuration information is displayed in the DHCP window.

Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 53067

Downloads: 1840

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next